In comparison with other bikes available the steering lock isnt that tight and needs to be better.
Have a look at this pic and see what i mean.
I took off half , but there was still a large gap that i could stick my fingers through between the frame and fork legs.
I then got the dremel out and removed the stops on each side all together
The new Betas stop on the chassis. The Jotagas has a reenforced area in any case where the forks would touch the frame. the result is a huge improvement in steering lock. When i turn hard to the left on full lock the fork leg stops on the JTG rubber cable stay. When i turn hard to the right the fork legs stops on the frame. I have slightly rerouted the clutch hose by pulling it discretely to one side with a cable tie.
6 trials - 2 mods - chain tensioner and steering lock.
You dont have to do either of these , its just me improving it for me.